Electrical equipment (93)

3 990 ISK

Varistor surge arrester, class 2 (T2/C): is used to protect LV power installations against effects of induced and switching surges / in buildings without lightning protection and with cable connection, the arrester provides sufficient protection without the need for mounting class 1 arresters (T1/B). Spike arresters, class II, Type 2 (group C). KSD-T2 class II surge arresters (SPD) are made in accordance with EN61643-1. These type 1+2 surge arresters are designed to protect low voltage installations against indirect atmospheric discharges and switching surges in the grid. Arresters provide protection in the 1-2 zone in accordance with EN62305 standard.

13 990 ISK

The surge arrester, class 1+2 (T1+T2/B+C), is used to protect LV power supply installations from the effects of surges generated during lightning discharges as well as induced or switching surges / intended for installation in TN/TT networks Complies with standard: EN61643-1, EN61643-11. Surge arresters (KSPD), type KSD-T1+T2, are manufactured in accordance with EN61643-1 and EN61643-11 standards. Type 1+2 surge arresters are engineered to protect low-voltage installations against partial, direct and indirect lightning discharges. The arresters provide protection inside 0A-1 zone in accordance with standard EN62305.

11 990 ISK

Residual current circuit breaker: is used for additional protection against electric shock, designed for work in sinusoidal alternating current circuits (AC type) and sinusoidal alternating and pulsating current with DC component (A type). Rated voltage [V] 400 AC Rated frequency [Hz] 50 Rated current [A] 63

265 ISK

Rated voltage [V] 400 AC Rated frequency [Hz] 50 Rated current [A] 63 Fuse element D02, replaceable, for KSF fuse disconnectors.

230 ISK

Rated voltage [V] 400 AC Rated frequency [Hz] 50 Rated current [A] 20 Fuse element D02, replaceable, for KSF fuse disconnectors.

349 ISK

Self-adhesive insulation tape Width [mm] 19 Length [mm] 20000

2 490 ISK

2 590 ISK

The electric bell is used for audible signalling in a 230 V AC, 50/60 Hz circuit and does not require a bell transformer.

11 990 ISK

Power supply voltage: 230 V AC The executive element: relay Maximum load current: 16 A Contact configuration: 1 × NO/NC Separation of the contact: YES Temperature regulation range: 4÷30°C Hysteresis - adjustable: 0,5÷3°C Accuracy of setting: 1°C Accuracy of measurement: ±1°C Temperature probe: RT/RT2 Terminal: pluggable terminal blocks 4,0 mm² Tightening torque: 0,5 Nm Power consumption: 1,1 W Working temperature: -25 ÷ 50 °C Dimensions: 2 modules (35 mm) Assembly: on rail 35 mm Ingress Protection Marking: IP20

2 590 ISK

Surge voltage: 4 kV Load capacity of main contacts: AC-12 (240 V AC): 5 A; AC-15 (230 V AC): 2 A; DC-1 (130 V DC): 1 A; Contact configuration: 2 × NO Standard number: PN-EN 60947-5-1 Isolation voltage: 500 V AC Terminal: Screw clamps 1.5 - 2.5 mm² Tightening torque: 0,8 Nm Working temperature: -5 ÷ 50 °C Dimensions: width: 9 mm; Assembly: on rail 35 mm Ingress Protection Marking: IP20

2 590 ISK

Surge voltage: 4 kV Load capacity of main contacts: AC-12 (240 V AC): 5 A; AC-15 (230 V AC): 2 A; DC-1 (130 V DC): 1 A; Contact configuration: 2 × NC Standard number: PN-EN 60947-5-1 Isolation voltage: 500 V AC Terminal: Screw clamps 1.5 - 2.5 mm² Tightening torque: 0,8 Nm Working temperature: -5 ÷ 50 °C Dimensions: width: 9 mm; Assembly: on rail 35 mm Ingress Protection Marking: IP20

2 590 ISK

Surge voltage: 4 kV Load capacity of main contacts: AC-12 (240 V AC): 5 A; AC-15 (230 V AC): 2 A; DC-1 (130 V DC): 1 A; Contact configuration: 1 × NC + 1 × NO Standard number: PN-EN 60947-5-1 Isolation voltage: 500 V AC Terminal: Screw clamps 1.5 - 2.5 mm² Tightening torque: 0,8 Nm Working temperature: -5 ÷ 50 °C Dimensions: width: 9 mm; Assembly: on rail 35 mm Ingress Protection Marking: IP20